Homogeneity matters in the structural stability of Si electrodes in lithium-ion batteries

The correlation between the solid-electrolyte interphase inhomogeneities and the early-stage defect formation in Si electrodes.

Like Comment
Read the paper

Si is one of the most promising anode candidates for lithium-ion batteries (LIB). This is mainly due to its high theoretical specific capacity (3579 mAh g-1), which is above 8 times higher than its commercially used carbon-counterparts (372 mAh g-1). However, the application of pure Si anode in commercial LIB is limited by two problematic issues. The first one is the severe mechanical failure (cracking) as a result of the more than 3-fold volume-change during lithium up-taking and releasing. The second issue is the interface problem, originating from the formation of a so-called solid-electrolyte interphase (SEI) via consuming movable lithium-ions and liquid-electrolyte decomposition. Intensive efforts have been devoted to understanding separately both problems, but without interrelation between those.

For this publication, I used a multi-modal approach to study their correlation. I first went to the European Synchrotron (ESRF) in Grenoble France to use Full-Field Diffraction X-ray Microscopy (FFDXM), a new operando synchrotron technique, to study the origin of structural deformation in Si during (de)lithiation. With FFDXM, we were able to observe early-stage defects (lattice tilts) as they started to form at the Si/LixSi interface. Quantitative analyses linked these early-stage defects to heterogeneous lithiation. The result is intriguing because the used samples were atomically flat, single-crystal Si, and homogeneous behavior was expected. This gave me the idea that the heterogeneous lithiation might come from inhomogeneities at the interface, originated from the SEI above. If the SEI is inhomogeneous, wouldn’t (de)lithiation of the underlying electrodes also be heterogeneous as it is acting as the lithium-ion conductor for Si?

Fig. 1. Schematic illustration of the multi-modal study. FFDXM working principle and operando electrochemical cell configuration (a). The multi-level interfaces probed by FFDXM (Si/LixSi) as well as the combination of AFM, ESM and XPS (Inner-/Outer-SEI) are schematically depicted in (b).

Back to my home lab at Forschungszentrum Juelich (IEK-9), I proceeded to use operando Atomic Force Microscopy (AFM), Electrochemical Strain Microscopy (ESM) and sputter-etched X-ray photoelectron spectroscopy (XPS) to study the SEI properties on Si. I found indeed both the Inner- and Outer-SEI exhibit considerable inhomogeneities in terms of topography and lithium-ion mobility. These SEI inhomogeneities inevitably led to heterogeneous lithiation in the underlying Si as seen by FFDXM. Our multi-modal study therefore bridges phenomena developing across the multi-level interfaces (Si/LixSi/Inner-SEI/Outer-SEI, schematically illustrated in Fig. 1), allowing us to understand the impact of SEI homogeneities on the structural stability of Si-based LIB, which was highlighted in the following animation model.

We hope our work can inspire researchers to pay more attention to the impact of interface homogeneity on the performance of LIB. This is not the end our interface story. Our future work is ongoing to study the interface evolution in Si-based all-solid-state LIB.

For more details, please see our recent paper in Nature Communications: Impact of dual-layer solid-electrolyte interphase inhomogeneities on early-stage defect formation in Si electrodes

Go to the profile of Chunguang Chen

Chunguang Chen

Scientific Assistant Researcher, Forschungszentrum Jülich (IEK-9)

No comments yet.